self- clinching nuts What do you need to pay attention to in summer

What self-Clinching Nuts need to watch out for in the summer

First of all, workers are the starting point of our production of self-clinching nuts, is our production power, positioning is very important, so for the health of workers: production in the workshop in the summer heat. The workers must do their utmost to prevent heatstroke. Accommodation and other personnel must be taken care of. We should always be aware that nuts, such as jack, riveted nuts, can not adhere to organic juice (such as melon vegetables, soup noodles, sputum, etc.), and in the presence of water and oxygen to form organic acids, long-term organic acid corrosion of metal surface; Stainless steel surface adhesion rich in acid, alkali, salt (such as decorative wall alkali water, lime water, etc.), resulting in about 3, corrosion in the air (such as rich in sulfide, carbon dioxide, nitrogen oxides of the atmosphere), condensate, the formation of sulfuric acid, acetic acid point, causing chemical corrosion. In the humid summer air, dust or dissimilar metal particles attached to the condensation of the riveted nut of the proton exchange membrane connect the two into tiny cells, causing an electrochemical reaction that destroys the protective membrane, known as electrochemical corrosion. Stainless steel riveted nut 5. Improve product quality, every detail: provide a regular standard equipment hole for each riveted fastener; Ensure that the bottom end (or track) of riveted fasteners is in the equipment hole before applying equipment force; Tightening forces are applied between parallel surfaces. Fastening force refers to the anti-deformation ability of fasteners during use and installation. In order for the ring to be fully embedded in the periphery and for the boss surface to contact the plate, a satisfactory equipment force is required.