Welcome to the official website of Dongguan Hongrui Hardware Technology Co., Ltd!

News

Product

contact

Dongguan Hongrui Hardware Technology Co., Ltd

Tel : 0769-89193593

Fax : 0769-89221086

Q  Q : 1430123581

Mobile : 18666860579 Mr.zhang

Mobile : 13925799157 Ms.Cao

Address: Shenshan Industrial Zone, Hengli Town, Dongguan City, Guangdong Province

Website : www.hongrui59.com com




Riveting studs: Specification for riveting nut studs

Your current location: home >> News >> Industry News

Riveting studs: Specification for riveting nut studs

Date of issue:2022-05-26 10:48 Source:http://en.hongrui59.com Click:

Riveting studs: Riveting studs Specification 1, selection of nuts, must be based on the thickness of the plate used, the exact size range, low carbon steel plate hardness must be less than, stainless steel plate hardness must be less than. 2, free-cutting iron surface treatment, stainless steel to maintain the original color, users can be ordered according to the table model specifications, also can be customized according to needs. 3, the plate hole size must be according to 0-+ 0. The tolerance dimensions for machining are recommended to be punched. 4, the installation must be through the “Pressure riveting”operation to achieve, must not impact into. 5. When the material is stainless steel, the tail number is marked with “S”. 6. The end face of the nut column is denoted by “C”for the straight tooth. 7. The length of the through hole nut post is less than full wire, in the above-mentioned Hexagon end face (type I) or round end face reaming (type II) riveting nut post can be divided into four types according to material and internal thread, namely, fast-cutting through-hole riveting nut post SO type, stainless through-hole riveting nut post SOS type, fast-cutting blind-hole riveting nut post BSO type and stainless steel blind-hole riveting nut post BSOS type, to be used in different environments.There is no specific national standard for Rivet nut column, the early manufacturers came from the United States, was introduced into the domestic industry gradually formed today’s standards. Most of the domestic producers are from Suzhou in Jiangsu Province and Dongguan in Guangdong Province. Riveting studs: There are two types of riveting studs, one is through hole riveting studs and the other is blind hole riveting studs. The main difference between them is whether the holes in the studs are connected or not, it’s a through hole. If it’s not open, it’s a blind hole. This mainly depends on how the customer is using, mainly depends on the performance and requirements of the product accessories to determine. One thing to note is that if the stud is too long, it is generally not very good through hole, not very good production. Therefore, the longer the Stud using blind hole pressure riveting stud more. For the production of riveting stud materials are carbon steel, medium carbon steel, stainless steel. Riveting nut columns made of carbon or medium carbon steel shall be heat treated and zinc or nickel plated.

Riveting studs

Relevant labels:RivetingStud,StainlessSteelRivetingStud,StandardSpecificationforrivetedstud

Recent browsing:

泓瑞五金

Copyright ©http://en.hongrui59.com/ Dongguan Hongrui Hardware Technology Co., Ltd Rivet nut,Press riveted stud,Rivet stud,Welcome to inquire!
Yue ICP Bei No. 15093989   Clouds platform  Technical Support:HUASHANG NETWORK    

Main business area: Dongguan Nanjing Xuzhou Shanghai Beijing Hebei Suzhou Shenzhen Jiangsu Wuhan

Online Service
share