How to rivet a rising rivet nut

The riveting process of rising rivet nut is a relatively simple but demanding operation, which is mainly applicable to the inlay process of the wall plate of products such as metal plates, control boxes and power cabinets. The following are the specific steps and precautions for rising rivet nut riveting:

Rising rivet nut riveting steps

Preparation stage:

Pre-open in the thin plate and rivet nut to match the plate hole, plate hole size should be based on the specifications of the rivet nut and the thickness of the material used to determine the general recommendation in the specifications provided by the table on the basis of the size of the size of the plus 0.08mm tolerance dimensions for processing, and is recommended to use the punching method in order to obtain the desired shape of the hole.

Select the appropriate rivet nut to ensure that its material, type and size in line with the requirements of use.

Installation Stage:

Place the sheet opening against the rivet rising nut, ensuring that the face of the head or round seat area of the rivet rising nut faces the coupling plate to comply with the installation criteria.

Use specialized riveting equipment (e.g., press) for riveting. Align the press punch with the non-internal part of the riveting nut and press down evenly so that the non-internal part rises from the inside to the outside and rivets tightly to the thin plate.

In the riveting process, attention should be paid to controlling the downward pressure to avoid excessive or insufficient to ensure the quality of riveting.

Checking stage:

After the riveting is completed, check whether the riveting of the rising rivet nut and the thin plate is flat and firm, without loosening or falling off.

If necessary, use a tool such as a torque wrench to conduct a torque test on the riveting nut to verify that the strength of the connection meets the requirements.

Precautions

Choosing the right rivet nut: Choose the right type and material of rivet nut according to the thickness and hardness of the material used and the environment.

Control the riveting quality: In the riveting process, the riveting parameters (such as the following pressure, time, etc.) should be strictly controlled to ensure the riveting quality.

Follow the installation sequence: For the installation of multiple rivet nuts, should follow a certain order to avoid mutual influence.

Pay attention to storage and maintenance: Riveting nuts should pay attention to moisture-proof, rust-proof and other maintenance measures during storage and use to extend their service life.

By following the above steps and precautions, you can ensure that the riveting process of riveting nuts goes smoothly and get a good connection effect.