How does the Rose Riveting nut fit correctly

Rose riveting nut, the main production of raw materials is a special toughness of steel, therefore Rose riveting nut assembly can be strong, not easy to fall off, etc., are widely applied to some products such as sheet metal, control box and power cabinet wall Mosaic, how to install up riveting nut is right?

Rose riveting nut before installation need to open a small hole on sheet metal, then will be free of that a small diameter in the tooth, with fine to coarse Rose with a circle around the small steps to open up, and then the casing mould pressing down to one open up the material and sheet metal pressure occlusion, so this is why up riveting nut without hard, Because of its small steps, the material rises in all directions, a process that required the riveting nut to be flexible enough to rise and bite tightly without causing cracks.

The riveting nut was designed to be a standard sheet metal thickness before the riveting nut was made. The thickness of the sheet metal was then used to determine the specifications for the riveting nut, which were relatively easy to install. Riveting nuts, riveting studs and PEM riveting nuts, are widely used in medical equipment, railways, automobiles, ships and telecommunications equipment.